Receiving Faxes Using The Drpd Mode; Receiving Faxes In The Memory; Polling Receive - Epson AcuLaser CX29NF User Manual

Receiving Faxes Using the DRPD Mode

The Distinctive Ring Pattern Detection (DRPD) is a telephone company service which enables a user
to use a single telephone line to answer several different telephone numbers. The particular number
someone uses to call you on is identified by different ringing patterns, which consist of various
combinations of long and short ringing sounds.
Before using the DRPD option, Distinctive Ring service must be installed on your telephone line by
the telephone company. To set up DRPD, you will need another telephone line at your location, or
someone available to dial your fax number from outside.
To set up the DRPD:
1. Press the System button.
2. Select Admin Menu, and then press the
3. Select Fax Settings, and then press the
4. Select DRPD Pattern, and then press the
5. Select the desired pattern, and then press the
6. Reboot the printer by turning the power switch off and then on again.
To receive faxes in the DRPD, you need to set the menu to DRPD. For details, see "Available Fax
Settings Options" on page 220.

Receiving Faxes in the Memory

Since your printer is a multi-tasking device, it can receive faxes while you are making copies or
printing. If you receive a fax while you are copying, printing, or run out of paper or toner, your printer
stores incoming faxes in the memory. Then, as soon as you finish copying, printing, or re-supply the
toner cartridges, the printer automatically prints the fax.

Polling Receive

You can receive faxes from the remote fax machine when you want to receive it.
1. Press the Fax button.
Epson AcuLaser CX29 Series
button.
button.
button.
button.
User's Guide
Faxing 210