Inserting A Pause; Sending A Fax Automatically - Epson AcuLaser CX29NF User Manual

Darker1
Darker2
Darker3

Inserting a Pause

For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A
pause must be entered in order for the access code to function. For example, enter the access code 9
and then press the Redial/Pause button before entering the telephone number. "-" appears on the
LCD panel to indicate when a pause is entered.

Sending a Fax Automatically

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Loading an Original Document on the ADF" on page 194
❏ "Loading an Original Document on the Document Glass" on page 195
2. Press the Fax button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏ "Resolution" on page 196
❏ "Lighten/Darken" on page 197
4. To select a fax number, do one of the followings:
❏ Select Fax to, and then press the
button.
❏ Press the One Touch Dial button, and go to step 6.
Works well with light print or faint pencil markings.
button. Select Phone Book, and then press the
Epson AcuLaser CX29 Series User's Guide
Faxing 198