Epson AcuLaser CX29NF User Manual page 221

Option
Ans Select TEL Mode
FAX Mode*
TEL/FAX Mode
Ans/FAX Mode
DRPD Mode
Auto Answer Fax
Auto Ans. TEL/FAX
Auto Ans. Ans/FAX
Line Monitor
Ring Tone Volume
Line Type
Epson AcuLaser CX29 Series
Description
Automatic fax reception is turned off. You can receive a fax by picking
up the handset of the external telephone and then pressing the
remote receive code, or by setting OnHook to On (you can hear voice or
fax tones from the remote machine) and then pressing the Start
button.
Automatically receives faxes.
When the printer receives an incoming fax, the external telephone
rings for the time specified in Auto Ans. TEL/FAX, and then the
printer automatically receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that the call is a
telephone call.
The printer can share a telephone line with an answering machine. In
this mode, the printer will monitor the fax signal and pick up the line if
there are fax tones.
Before using the Distinctive Ring Pattern Detection (DRPD) option,
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a
separate number for faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring pattern.
Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call. The interval can be specified within
the range of 0 to 255 seconds. The default is 0 second.
Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call. The interval can
be specified within the range of 0 to 255 seconds. The default is 6
seconds.
Sets the interval at which the printer goes into the fax receive mode
after the external answering machine receives an incoming call. The
interval can be specified within the range of 0 to 255 seconds. The
default is 21 seconds.
Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is made.
Sets the volume of the ring tone, which indicates that an incoming call
is a telephone call through the internal speaker when Ans Select is
set to TEL/FAX Mode.
You can select the default line type.
❏
PSTN
❏
PBX
User's Guide
Faxing 221