Using The Stored Print Function; Secure Print; Sample Print - Epson AcuLaser CX29NF User Manual

Using the Stored Print Function

When you send a job to the printer, you can specify in the driver that you want the printer to store the
job in the memory. When you are ready to print the job, go to the printer and use the operator panel
menus to identify which job in the memory you want to print.
The stored print function includes the following job types:
❏ "Secure Print" on page 104
❏ "Sample Print" on page 104
Note:
❏ Stored Print function is available when:
❏ The additional memory module is installed.
❏ The RAM disk is enabled in the operator panel menu.
❏ RAM Disk is set to Available in the print driver.
❏ The data in memory is cleared when the printer is turned off.

Secure Print

You can store print jobs temporarily in printer memory and print them later from the operator panel.
This feature can be used to print confidential documents. A stored print job will be deleted after you
print it or at a designated time.
Note:
❏ Secure Print is available when you use the PCL driver.
❏ Secure Print requires specifying a password for confidentiality.

Sample Print

When you specify multiple copies for a collated job, this feature allows you to print only the first set for
checking, before proceeding to print the remaining copies at the printer. You can select whether the
remaining data is printed or deleted.
Note:
❏ If a print job is too large for the memory available, the print may display error messages.
Epson AcuLaser CX29 Series
Printing Basics
User's Guide
104