Setting Copy Options; Number Of Copies; Color - Epson AcuLaser CX29NF User Manual

3. Press the Start button to begin copying.
Note:
Press the Stop button to cancel a copy job at any time while scanning a document.

Setting Copy Options

Set the following options for the current copy job before pressing the Start button to begin copying.
Note:
The copy options automatically return to their default status after the next copy is performed or the auto
clear timer is expired.

Number of Copies

To specify the number of copies from 1 to 99.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Making Copies From the Document Glass" on page 126
❏ "Making Copies From the ADF" on page 129
2. Press the Copy button.
3. Enter the number of copies using the numeric keypad.
4. Press the Start button to begin copying.

Color

To select the mode for color or black and white copying.
1. Load the document(s) face up with top edge in first into the ADF.
Epson AcuLaser CX29 Series User's Guide
Copying 130