Networking Basics; Check Your Ip Address - D-Link DHP-W307AV User Manual

Powerline av wireless n starter kit

Hide thumbs Also See for DHP-W307AV:

Table of Contents

Appendix B - Networking Basics

Networking Basics

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP

server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

Click on Start > Run. In the run box type cmd and click OK. (Windows Vista

users type cmd in the Start Search box.)

At the prompt, type ipconfig and press Enter.

This will display the IP address, subnet mask, and the

default gateway of your adapter.

If the address is 0.0.0.0, check your adapter installation,

security settings, and the settings on your access

point. Some firewall software programs may block a

DHCP request on newly installed adapters.

If you are connecting to a wireless network at a

hotspot (e.g. hotel, coffee shop, airport), please

contact an employee or administrator to verify their wireless network settings.

D-Link DHP-W307AV User Manual

Table of Contents