D-Link DHP-W307AV User Manual page 25

Section 3 - Configuration
This section provides information on the Powerline
AV devices in your Powerline network, or any devices
that were previously connected but it are currently
disconnected.
Displays the device's current data rate in Mbps.
This field shows the status of the device. If the field
displays the word Connect, then the device is connected
to your Powerline network. If the field displays the word
Disconnect, then the device has been added to the
network but it is not ready. Please check its password
and make sure the device is powered on.
You can configure your Powerline AV devices to give
priority to powerline network traffic according to its
unique MAC Address.
D-Link DHP-W307AV User Manual 25