Powerline Network - Quick Setup; Simple Connection Button Usage - D-Link DHP-W307AV User Manual

Powerline av wireless n starter kit

Hide thumbs Also See for DHP-W307AV:

Table of Contents

Section 2 - Installation

Powerline Network - Quick Setup

The Simple Connection Button is used to add a Powerline AV device to a Powerline network. You can allow a Powerline AV

device to join a network by pressing the Simple Connection Button to toggle it to the Broadcast state or Join state.

The Simple Connection Button has 3 different trigger states:

Broadcast state - Enables a Powerline AV device to provide information for another Powerline AV device to join

its Powerline network (works even if it is the only device existing within the network group). The first Powerline

device will use this state when the Simple Connection Button is pressed.

Join state - This allows an ungrouped Powerline AV device to join an existing Powerline network. Powerline

devices added after the first device will be in the Join State when the Simple Connection Button is pressed.

Ungroup state - Hold down the Simple Connection Button for more than 10 seconds to detach the device from

its network group.

D-Link DHP-W307AV User Manual

Table of Contents