Section 1 - Product Overview Product Overview Package Contents • D-Link DHP-302 Powerline HD Ethernet Adapter • CAT5 Ethernet Cable • CD-ROM with Software and Manual • Quick Installation Guide System Requirements • Windows Vista , XP (with Service Pack 2) or 2000 (with Service Pack 4) ®...
Section 1 - Product Overview Introduction D-Link announces a fast, 200Mbps Powerline HD Ethernet Adapter which allows you to network your home computers, networking devices and gaming devices through the most pervasive medium in your house - the electric powerlines - and share Internet connections, printers, transfer files, play games, and more.
Green LED: Power Line speed > 20Mbps (non master unit) Amber LED: Power Line speed < 20Mbps or > 6Mbps (non master unit) Red LED: Power Line speed < 6Mbps or link is down. (non master unit) D-Link DHP-30 User Manual...
Section 1 - Product Overview Hardware Overview Connection Push Button Security Press to secure your network. Refer to page 8 for more information. Ethernet Port Connect CAT5 Ethernet cable to the DHP-302 Ethernet port. D-Link DHP-30 User Manual...
Connect the included Ethernet cable to the network cable connector located on the DHP-302 and attach the other end of the Ethernet cable to the network or PC. Network Connectivity is confirmed when the green LED Indicator on the DHP-302 located left of the Power LED is illuminated. D-Link DHP-30 User Manual...
First Adapter 3. First Adapter Wait until the AP LED stops flashing (up to 30 seconds). 4. First Adapter The AP LED remains on and is now ready to start registering new adapters. First Adapter D-Link DHP-30 User Manual...
Page 9
Press the button until its AP LED starts flashing and continue to the new adapter. Press and hold the button First Adapter 6. New Adapter Press and hold the button in the new adapter until the AP LED starts flashing. Press and hold the button New Adapter D-Link DHP-30 User Manual...
Page 10
After registering the new adapter, the AP LED of the first adapter remains on and its Throughput LED will indicate the link quality. Note: When adding more adapters, repeat steps 5 to 8. At the end of this process, only one adapter should have the AP LED on. First Adapter D-Link DHP-30 User Manual...
Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-302 CD into your CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Start > Run.
Page 12
Section - Installation Click Next Click Finish D-Link DHP-30 User Manual...
Section 3 - Configuration Configuration After you have completed the D-Link DHP-302 Utility installation wizard, double-click the D-Link DHP-302 Powerline HD Utility icon on your desktop to start the configuration of the DHP-302. Double-click the D-Link DHP-302 Powerline HD Utility icon...
Page 14
• Single-click on the nodes that you want to change. • Once all the nodes you want to encrypt with a non-default Network ID, click the Security page. • Change to different Network ID. • Press Save Settings. D-Link DHP-30 User Manual...
0-9, A-Z, case sensitive) ie. Living room, Bedroom, etc. Network ID: Powerline Network Name. The default ID is DHP-302 (Max 10 characters, 0-9, A-Z, case sensitive). MAC: MAC Address of detected node. Location: Local or Remote nodes. D-Link DHP-30 User Manual...
Page 16
Scan: Scan the powerline network for PLC nodes. Check the AutoScan box to scan the network periodically. Note: Network ID can be changed to prevent unauthorized access to your powerline network. Make sure the Network ID of the devices within your powerline network are the same to enable data transmission. D-Link DHP-30 User Manual...
0-9, A-Z, case sensitive) ie. Living room, Bedroom, etc. Network ID: Powerline Network Name. Default is DHP-302 (Max 10 characters, 0-9, A-Z, case sensitive). Use Default button: Select to reset the Network ID to the default value (DHP-302) D-Link DHP-30 User Manual...
TCP (Transmission Control Protocol) for data transfer. Application QoS: Select an application from the drop-down menu of predefined QoS rules to apply QoS automatically. Click the Save Settings button to apply your settings. D-Link DHP-30 User Manual...
Rule: Select the traffic type (UDP or TCP) to have priority. 802.1p use prioritization bits in Layer-2 frames. Port: Input the port number to have priority. Priority: Input port priority from 1 to 6. The highest priority is 6, and the lowest is 1. Note: Rule 1 has priority over Rule 2 D-Link DHP-30 User Manual...
15 minutes, the DHP-302 will automatically go into stand-by mode. Reset To reset your configuration password, please click Reset to restore the password to the factory default value. D-Link DHP-30 User Manual...
If you are having many problems configuring the network with two or more PowerLine HD Ethernet Adapter, please make a reset to all of the Ethernet adapters, reset the utility and start configuring the adapter again. D-Link DHP-30 User Manual...
• FCC Part 15 Class B • CE Class B AC Input 110 ~ 240VAC Operation Temperature 0°C ~ 40°C Storage Temperature -10°C ~ 70°C Humidity • Operation: 10% ~ 90% RH • Storage: 5% ~ 90% RH D-Link DHP-30 User Manual...
• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 25
Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...
Page 26
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.
This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DHP-30 User Manual...
Appendix D - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 July 11, 2008 D-Link DHP-30 User Manual...