Dhp-W306Av Side - D-Link DHP-W307AV User Manual

Section 1 - Product Overview
Reset Button
Press and hold to reset the
device back to the factory
default settings.
WPS/Eny LED
When enabling WPS, the light will blink
during broadcast. Once connected, the
LED will remain lit 5 seconds and then
will turn off. The LED will start blinking
after the Encryption button is pushed.
The LED will turn off once the Powerline
AV is connected to a Powerline network.
D-Link DHP-W307AV User Manual
Hardware Overview

DHP-W306AV Side

Simple Connect Button
Push this button to establish a
secure powerline network with
other Powerline AV devices.
WPS Button
Press to start the WPS process. You
will have 120 seconds to start the WPS
process on another wireless device.
10