D-Link DHP-W307AV User Manual page 24

Section 3 - Configuration
Network Name:
You can set the name of your network and to make it
either public or private. Make sure the Network Name
of all of the devices within your Powerline network is
the same.
Public Network
Select this option if you would like to make your
Name:
powerline network public with the default Network
Name of "HomePlugAV". Since this is a commonly used
Network Name, it is less secure than a private Network
Name.
Private Network
Select this option if you wish to make your powerline
Name:
network more secure by using a private Network Name.
Type the name of your private Powerline network in
the field.
Add Member:
This section lets you add new Powerline AV devices to
your Powerline network. To add a new device, give it a
Device Name and enter its Password, then click Add.
When you add a device it is given the current Network
Name.
Scan:
Scan for new Powerline devices.
Device Name:
Type a name you wish to use to identify a specific
Powerline AV device. For example, "Jack's room".
MAC Address:
You can find the MAC address printed on the back of
your device.
Password:
The Password is used to verify that you are authorized to
perform changes on a device. You can find the Password
printed on the back of your device.
D-Link DHP-W307AV User Manual 24