Configure Static Routes - NETGEAR DGN1000-100NAS User Manual

N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
The Gateway IP Address field specifies that all traffic for these addresses are to be
•
forwarded to the ISDN router at 192.168.0.100.
The value in the Metric field represents the number of routers between your network and
•
the destination. This is a direct connection, so it can be set to the minimum value of 2.
The Private check box is selected only as a precautionary security measure in case RIP
•
is activated.

Configure Static Routes

Select Advanced > Static Routes to display the following screen
1.
Figure 50. View additional routing information
To add a static route:
2.
a. Click Add to open the following screen.
Figure 51. Add static routes
b. In the Route Name field, enter a route name for this static route. This name is for
identification purpose only.
c. Select Private if you want to limit access to the LAN only. The static route will not be
reported in RIP.
d. Select Active to make this route effective.
Chapter 6. Advanced Settings | 81