Edit Or Delete An Existing Qos Policy; Configure Static Routes - NETGEAR DGND3300v2 User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
QoS for a MAC Address

To create a QoS policy for traffic from a specific MAC address:
1. From the main menu, select Advanced > QoS Setup. The QoS Setup screen displays.
2. Click Add Priority Rule.
3. In the Priority Category field, select MAC Address. The screen changes:
4. If the device to be prioritized appears in the MAC Device List, select it. The information from
the MAC Device List is used to populate the policy name, MAC Address, and Device Name
fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not
appear, you need to complete these fields manually.
5. From the Priority drop-down list, select the priority that this device's traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the Turn Internet Access QoS On check box.
8. Click Apply.

Edit or Delete an Existing QoS Policy


To edit or delete an existing QoS policy:
1. From the main menu, select Advanced > QoS Setup. The QoS Setup screen displays.
2. Select the radio button for the QoS policy to be edited or deleted, and do one of the
following:
• Click Delete to remove the QoS policy.
• Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to
change the policy settings.
3. Click Apply in the QoS Setup screen to save your changes.

Configure Static Routes

Static routes provide additional routing information to your N300 wireless modem router.
Under usual circumstances, the N300 wireless modem router has adequate routing
Advanced Settings (Part 1)
121