Router Not On; Power Led Is Off - NETGEAR DGN1000-100NAS User Manual

N150 wireless adsl2+ modem router
Table of Contents

Advertisement

N150 Wireless ADSL2+ Modem Router DGN1000 User Manual

Router Not On

When you turn the power on, the power, LAN, and DSL LEDs should light as described here.
If they do not, refer to the sections that follow for help.
When power is first applied, the Power LED lights.
1.
After approximately 10 seconds, the LAN and DSL LEDs light as follows:
2.
a. The LAN port LEDs light for any local ports that are connected.
b. The DSL link LED lights to indicate that there is a link to the connected device.
c. If a LAN port is connected to a 100 Mbps device, verify that the LAN port's LED is
green. Note that if the LAN port is 10 Mbps, the LED is amber.
LAN Ports (1–4)
Power
Figure 54. Front panel LED Icons

Power LED Is Off

If the Power and other LEDs are off when your router is turned on:
Check that the power cord is correctly connected to your router and the power supply
adapter is correctly connected to a functioning power outlet.
Check that you are using the 12-V DC power adapter supplied by NETGEAR for this
product.
If the error persists, you could have a hardware problem and should contact NETGEAR
Technical Support.
DSL
Wireless
Internet
WPS
Chapter 7. Troubleshooting
| 85

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgn1000

Table of Contents