Table of Contents
Advertisement
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
Remote Management
The Remote Management screen lets you allow a user or users on the Internet to configure,
upgrade, and check the status of your wireless modem router.
Select Advanced > Remote Management to display this screen:
1.
Figure 49. Upgrade or check your router over the Internet
Select the Turn Remote Management On check box.
2.
Specify the external addresses of wireless modem routers than can access remote
3.
management. For security, restrict access to as few external IP addresses as practical:
To allow access from a single IP address on the Internet, select Only This Computer
•
and enter the IP address that is allowed access.
To allow access from a range of IP addresses on the Internet, select IP Address and
•
enter a beginning and ending IP address to define the allowed range.
To allow access from any IP address on the Internet, select Everyone.
•
Specify the port number to be used for accessing the router interface.
4.
Web browser access usually uses the standard HTTP service port 80. For greater
security, you can change it so the remote router interface uses a custom port by entering
Chapter 6. Advanced Settings
| 79
Advertisement
Table of Contents
