Table of Contents
Advertisement
The PIN method displays this screen so you can enter the client security PIN number:
Figure 17. Add WPS Client using the PIN number method
While the wireless modem router attempts to connect to a WPS-capable device, the
•
WPS LED on the front of the wireless modem router blinks green. When the wireless
modem router establishes a WPS connection, the LED is solid green.
If a connection is established, the wireless modem router WPS screen displays a
•
confirmation message.
Repeat to add another WPS client to your network.
4.
Wireless Settings Screen
The Wireless Settings screen lets you view or configure the wireless network configuration. If
you want to make changes, note the current settings first. Once you have established basic
wireless connectivity, you can enable security settings appropriate to your needs. NETGEAR
recommends that you not change the Wi-Fi network name (SSID), WPA/WPA2-PAK
passphrase, or security option, but if you want to change these settings, this section
explains how.
If you use a wireless computer to change the wireless network name
Note:
(SSID) or other wireless security settings, you are disconnected
when you click Apply. To avoid this problem, use a computer with a
wired connection to access the modem router.
38 |
Chapter 3. Wireless Settings
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
Advertisement
Table of Contents
