Table of Contents
Advertisement
Automatic Firmware Checking On
When automatic firmware checking is on, the wireless modem router performs the check and
notifies you if an upgrade is available or not as shown here.
Figure 35. Firmware upgrade assistant and results screen
Click Yes to allow the wireless modem router to download and install the new firmware.
1.
The upgrade process could take a few minutes. When the upload is complete, your
wireless modem router restarts.
Go to the DGN1000 support page at
2.
firmware release notes to determine whether you need to reconfigure the modem router
after upgrading.
If you get a "Firmware needs to be reloaded" message, it means a
Note:
problem has been detected with the router's firmware. Follow the
prompts to correct the problem or see
Reloaded
60 |
Chapter 5. Network Maintenance
N150 Wireless ADSL2+ Modem Router DGN1000 User Manual
http://www.netgear.com/support.
on page 92 for a description of the steps.
and read the new
Firmware Needs to Be
Advertisement
Table of Contents
