Reference; Ui Reference Topics; Ui Reference: Elements To Define Attributes Of A Dmp Display - Cisco DMS-DMP-4300G User Manual

Chapter 10 Configure Settings for Touchscreens, Projectors, and Displays
Step 3
Click Apply to confirm that you are satisfied with the entries or changes that you made and to record
them in volatile memory.
After you click Apply, the entries or changes take effect. However, the previously defined values will
return the next time that your DMP restarts.
Step 4
(Optional) Would you like to put all changed values into effect permanently, so that they persist even
after your DMP restarts? Choose Administration > Save Configuration and, when the Save
Configuration page appears, click Save.
Step 5
Stop. You have completed this procedure.

Reference

•

UI Reference Topics

•
•

UI Reference: Elements to Define Attributes of a DMP Display

Table 10-1 Elements on the DMP Display Attributes Page
Element
DMP Display Attributes
DMP Display Autodetection
(requires HDMI)
Autodetection Status
Frame Rate
OL-15764-03
UI Reference Topics, page 10-7
UI Reference: Elements to Define Attributes of a DMP Display, page 10-7
UI Reference: Elements to Define DMP Display Dimensions, page 10-10
Description
Indicates whether you have enabled automated detection of the DMP display type. Choose an
option:
•
Enabled — Autodetection is enabled.
•
Disabled — Autodetection is disabled.
Indicates whether autodetection succeeded.
Indicates whether your display uses PAL (50 Hz) or NTSC (60 Hz). Most displays that support
HDMI connections also support both the PAL and NTSC frame rate standards. If you choose
the wrong value, image quality is degraded.
User Guide for Cisco Digital Media Player Device Manager 5.2.x
Reference
10-7