Chapter 12
File Storage
After you click Apply, the entry or change takes effect. However, the previously defined value will return
the next time that your DMP restarts.
Step 3
(Optional) Would you like to put all changed values into effect permanently, so that they persist even
after your DMP restarts? Choose Administration > Save Configuration and, when the Save
Configuration page appears, click Save.
It is not necessary to restart your DMP.
Step 4
Stop. You have completed this procedure.
Related Topics
•
Mount or Unmount a Network Share
Note
DMPs can mount only one shared volume at a time.
Procedure
Step 1
Click Manage WAAS Share in the Administration list.
Step 2
Enter or edit the required values, and then click Apply.
Step 3
Do one of the following.
•
•
Step 4
Stop. You have completed this procedure.
Related Topics
•
•
Reference
•
UI Reference Topics
•
•
OL-15764-03
UI Reference: Elements to Define Internal Storage Settings, page 12-4
Click Mount Share to connect your DMP to this network share immediately.
Click Unmount to disconnect your DMP from this share.
UI Reference: Elements to Define Network Share Settings, page 12-4
Enable or Disable Types of Access to Your DMP, page 9-6
UI Reference Topics, page 12-3
UI Reference: Elements to Define Internal Storage Settings, page 12-4
UI Reference: Elements to Define Network Share Settings, page 12-4
User Guide for Cisco Digital Media Player Device Manager 5.2.x
Reference
12-3