Chapter 7 Log In To Dmpdm; Procedures; Log In - Cisco DMS-DMP-4300G User Manual

Log in to DMPDM
Revised: June 1, 2011
This section explains how to access DMPDM.
•

Procedures

•

Log in

Before You Begin
•
Procedure
Step 1
While your presentation system shows the Cisco logo and shows an IP address for your DMP, write down
the IP address.
Tip
Step 2
Point your browser to the IP address that you wrote down. Use HTTPS as the connection protocol.
The connection fails when you use HTTP instead of HTTPS. This failure occurs by design, to support
security in your network.
Step 3
Respond to the prompt. It sometimes varies.
OL-15764-03
Procedures, page 7-1
Log in, page 7-1
Connect your DMP to its presentation system, and make sure both are turned On.
Later, you can change how long this splash screen is visible during startup. See the
Duration to Obscure the DMP IP Address" section on page
C H A P T E R
9-2.
User Guide for Cisco Digital Media Player Device Manager 5.2.x
7
"Edit the Splash Screen
7-1