Using The Site Survey Utility - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0(1)
Hide thumbs Also See for 7925G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Site Survey Verification
SSID: abcd
Channel
01
06
11
To see more information about an AP, scroll to the desired line and press Details. The following is an
Step 4
example of the details for a specific AP:
SSID: abcd
Channel:06
BSSID: 00:13:1a:16:cf:d0
RSSI:-51
CU:38
To verify the ability to roam between APs, walk through all areas where phones are used and take
Step 5
readings. Approach areas from different directions to assure successful roaming conditions.
Adjust AP and antenna placement and AP power settings to provide approximately 20 percent coverage
Step 6
overlap.

Using the Site Survey Utility

The Site Survey utility is used to actively and passively scan the wireless medium across all channels
and locate APs that belong to the Basic Service Set (BSS). The results of the scans are then used help to
identify areas of low coverage, if any, and to determine whether the APs are configured consistently as
recommended in the Cisco deployment guidelines.
When you start the Site Survey utility, the phone disassociates from the current AP and remains
disassociated for the duration of the operation.
For more information, see
During Site Survey, both active and passive scans are performed at a rapid rate. These scans will result
Caution
in the phone battery life depleting faster than normal and might cause disruption to the wireless medium.
To use the Site Survey utility, follow these steps:
Procedure
Configure the Cisco Unified Wireless IP Phone 7925G with the same SSID and
Step 1
encryption/authentication settings as the APs.
Step 2
Power on the phone so that it associates with the WLAN.
Step 3
Choose SETTINGS > Status > Site Survey.
The phone displays a list of APs within range that have the same SSID and security settings as the phone.
To see more information about an AP, scroll to the desired line and press Details.
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
2-24
BSSID
RSSI
19:50
-38
cf:d0
-51
7b:b0
-42
Viewing the Site Survey Report on the Web, page
Chapter 2
Overview of the VoIP Wireless Network
Channel
Utilization
50
38
61
4-38.
OL-15984-01

Advertisement

Table of Contents
loading

Table of Contents