Viewing Device Information
Trust List Screen
The Trust List screen displays information about all of the servers that the phone trusts.
If a CTL file is installed on the phone, you can access the Trust List screen by choosing Settings >
Security Configuration > Trust List.
To exit the Trust List screen, press the Exit softkey.
The Trust List screen contains these options:
•
•
•
Related Topics
•
•
•
Viewing Device Information
You can access the Device Information screen on the Cisco Unified Wireless IP Phone 7925G and to
view information about the current configuration:
•
•
•
•
•
•
•
To view the Device Information screen, follow these steps:
Procedure
Choose Settings menu> Device Information.
Step 1
Use the Navigation button to scroll to one of the categories in the Device Information screen and press
Step 2
Select.
The list of items under the category displays.
Table 8-2
Step 3
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
8-4
Chapter 8
CAPF Server—IP address of the CAPF used by the phone. Also displays a certificate
certificate is installed for this server.
Communications Manager / TFPT Server—IP address of a Cisco Unified Communications Manager
and TFTP server used by the phone. Also displays a certificate
for this server.
SRST Router—IP address of the trusted SRST router that is available to the phone, if such a device
has been configured in Cisco Unified Communications Manager Administration. Also displays a
certificate
icon if a certificate is installed for this server.
Viewing the Status Messages, page 8-9
Viewing Call Statistics, page 8-14
Viewing Firmware Versions, page 8-16
Cisco Unified Communications Manager servers
Network settings
WLAN information
HTTP information
Locale information
Security settings
QoS information
describes the categories and items that appear in this screen.
Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
icon if a
icon if a certificate is installed
OL-15984-01