Disabling Dhcp; Configuring The Alternate Tftp Server - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Configuring Network Profiles
Step 3 Click Save to make the change.

Disabling DHCP

To disable the use of DHCP in the Network Profile, follow these steps:
Procedure
Choose the network profile that you want to configure.
Step 1
Under the IP Network Configuration area, choose this option:
Step 2
Use the following IP addresses and DNS servers
You must enter these required IP addresses. See
Step 3
Click Save to make the change.
Step 4
Table 4-7
Static Setting
IP Address
Subnet Mask
Default Router 1
DNS Server 1
DNS Server 2
TFTP Server 1
TFTP Server 2
Domain Name

Configuring the Alternate TFTP Server

If you use DHCP to direct the Cisco Unified Wireless IP Phone 7925Gs to a TFTP server, you can also
assign an alternative TFTP server to some phones instead of the one assigned by DHCP.
Note
To assign an alternate TFTP server to a phone, follow these steps:
Procedure
Choose the network profile that you want to configure.
Step 1
Step 2 In the TFTP area, choose this option:
Use the following TFTP servers
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-24
Static IP Addresses When DHCP is Disabled
If you disable DHCP, then you must use these steps to set up the TFTP server for the phone.
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Table 4-7 for descriptions of these fields.
Description
IP address of the phone
Subnet mask used by the phone
Primary gateway used by the phone
Primary DNS server used by the phone
Optional backup DNS server used by the phone
Primary TFTP server used by the phone
Optional backup TFTP server used by the phone
Name of the DNS in which the phone resides
OL-15984-01