Survivable Remote Site Telephony Overview
Feature name
Redial
Speed Dial
Speed Dial Line Status
Support for Hold Button
on USB Headsets
Transfer
Survivable Remote Site Telephony Overview
If communication between your phone and the Cisco Unified Communications Server is interrupted, you
receive an alert message on your phone. If you are on an active call, the call remains established, and you
enter a failover situation. This failover is the Survivable Remote Site Telephony (SRST) feature.
While in failover, not all the features of your phone are available. The following table describes typical feature
and feature availability, although not all the features may be supported on your phone . For more information
about feature availability during failover, contact your system administrator.
SRST does not support IPv6.
Note
Table 2: Feature Support During Failover
Feature
New Call
End Call
Redial
Answer
Hold
Resume
Conference
Conference to Active Calls (Join)
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications
Manager 11.0
108
REVIEW DRAFT - CISCO CONFIDENTIAL
Dedicated feature
button
X
Programmable feature
button
X
X
X
Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Advanced Operations
Softkey
X
X
X
X
X
Notes
The Active Calls softkey does not
display.