Assembling And Using Your Breville Wizz Processor Duo; Before First Use; The Food Processor Bowl; Assembling And Operating The Food Processor - Breville BFP300 Instructions Manual

Assembling and using your Breville Wizz™ Processor Duo
BefoRe fIRst use
Remove and safely discard all packaging materials
and promotional labels or from your Wizz™
Processor Duo.
Wash the food processor bowl, blender jug, lids
and other attachments in warm soapy water
using a mild detergent. Dry thoroughly. (Refer to
the 'Cleaning, Care and Storage' section of this
booklet on page ).
tHe fooD PRoCessoR BoWl
Assembling and operating the food
processor
The food processor bowl and lid and the blender
safety locking cover must be correctly assembled
for the food processor to operate.
Step 1. P lace the motor base on a dry, level
surface, such as a bench top
Step 2. P lace the food processor bowl over the
drive shaft on the motor base so that the
handle fits firmly into the groove on the
right-hand side of the motor base.
2a
2b
8
Attaching the slicing/shredding/
grating/french fry cutting discs
Step 1.
Select the desired slicing/shredding/
grating/French fry discs (disc marked A-F)
and assemble onto the disc holder. To fit
a selected disc onto disc holder fit the
bottom of the disc (face up) into the disc
holder and then push the top of the disc
securely into place.
1
each time the Wizz™ Processor Duo is
reassembled, be sure to attach the food
processor bowl and blender jug (if required)
onto the motor base before attaching the lids.
Insert the blender safety locking cover if the
blender jug is not required.
Do not blend food/wet ingredients in the food
processor and blender jug simultaneously