Loading Paper In Tray 1 (Mpt) For 2-Sided Printing - Dell 7330 User Manual

5. If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup
b.
Select the paper type, and then press the OK button to save your selection.
6.
In the printer driver, select either the paper type or Tray 6 as the paper source.

Loading Paper in Tray 1 (MPT) for 2-Sided Printing

All standard paper sizes, except postcard, B6 JIS, and envelopes, and most custom paper sizes
can be used in Tray 1 (MPT) for 2-sided printing.
Caution: If you change the type or size of
paper in a tray, you must change the paper
type and size on the control panel to match
the paper that you loaded. If you fail to do
this, print-quality problems or jams can
occur, and the fuser can be damaged.
1.
Lower Tray 1 (MPT).
and then press the OK button.
Dell 7330 Mono Laser Printer
4-20
Loading Paper
7330-123
7330-263