Accessing The Startup Page - Dell 7330 User Manual

Accessing the Startup Page

The printer can produce a Startup Page each time the printer is turned on or reset. The factory
default is Off. You can turn on automatic printing of the Startup Page or print it from the
menu.
Information Pages
To turn on/off the Startup Page use either:
■ The printer's control panel
■ Embedded Web Server
Using the Control Panel
To turn on/off the Startup Page:
1. Select
Printer Setup
2. Select
Printer Controls
The is highlighted. The end of the line displays the setting (
Startup Page
3.
Press the OK button to change the setting.
Using the Embedded Web Server
To turn on/off the automatic printing of the Startup Page:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field.
3. Select Properties.
4. Select the General folder on the left navigation panel.
5. Select Printer Defaults.
6. Select Off or On from the Printer Startup Page drop-down list to change the setting.
7. Click Save Changes at the bottom of the page.
Printing the Startup Page Using the Control Panel
To print the Startup Page:
1.
Select , and then press the OK button.
Information
2.
Select
Information Pages
3.
Select
Startup Page
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button to print.
Dell 7330 Mono Laser Printer
5-4
Printer Settings
or ).
On Off