Dell 7330 User Manual page 173

3. Push the tray completely into the printer.
4. Specify the size of the paper by doing the following:
a. In the control panel menus, select
b.
Select Paper Handling Setup
c. Select
Tray [2 - 5] Setup
d. Select
Auto Sensed, Custom
e. If you selected
Custom
, press the OK button, scroll to the width of the paper, and then press the
Width
OK button. Select
paper, and then press the OK button.
5. Open Door A.
Warning:
Use caution; some components inside Door A may be hot.
Printer Setup
, and then press the OK button.
, and then press the OK button.
, or a listed paper size, and then press the OK button.
, specify the width and height of the paper. Select
, press the OK button, scroll to the height of the
Custom Height
Dell 7330 Mono Laser Printer
6-31
Clearing Paper Jams
7330-032
, and then press the OK button.
7330-001
Custom