Parts Removal And Replacement Procedures; Removing/Replacing The Notebook Battery Pack - NEC Versa 2400 Series Service Manual

4-4 Field Service Guidelines

PARTS REMOVAL AND REPLACEMENT PROCEDURES

This section contains field service-level removal/replacement procedures for the notebook.
Refer to the exploded diagram later in this section to identify all relevant parts. The NEC
Versa notebook is designed for optimum modularity in order to make field replacement
maintenance easy and efficient.

Removing/Replacing the Notebook Battery Pack

The procedure for removing and replacing the battery pack is as follows:
1. Turn off the computer. Close the LCD cover and turn the whole unit over.
You will find a clamp latch (lock knob) that is securing the internal battery pack
2.
to the system unit. To remove the battery pack, push the lock knob sideways with
one hand and with the other hand pull the battery pack out. Note that this has to
be done simultaneously.
3. To replace the battery pack again, simply slide the battery pack into the system
unit until you hear the spring latch hook snap into place. The battery pack can
only be inserted in one direction so there is no danger of improper insertion.