Mb Memory Configurations - NEC Versa 2400 Series Service Manual

1-20 Introduction
For NEC Versa 2400 Series Notebooks, the following memory configurations are applica-
ble:
Table 1-8 8 MB Memory Configurations
On-Board Memory
8MB
8MB
8MB
8MB
8MB
Table 1-9 16 MB Memory Configurations
On-Board Memory
16 MB
16 MB
16 MB
16 MB
To upgrade the memory in the notebook, follow the steps mentioned below:
1. Power off the computer and remove the AC adapter and battery pack.
2. Remove the hinge covers, status bar cover, and the keyboard from the top of the
unit and locate the memory expansion sockets.
Remove the extra DIMM module from its anti-static wrapping.
3.
4. Hold the memory module with its golden teeth connector pointed towards the
memory socket. Incline the module at 60-degreesand gently attached it to the
memory socket by pushing it forward.
5. Slowly push the module downwards until the locking tabs snap into the retaining
notches or holes at each corner of the module.
6. Replace the keyboard, status bar cover, and hinge covers.
7. Reconnect the AC adapter and reattach the battery pack to the computer.
Extra Socket Total Memory
empty 8MB
8MB 16MB
16MB 24MB
24MB 32MB
32MB 40MB
Extra Socket Total Memory
empty 16 MB
8 MB 24 MB
16 MB 32 MB
32 MB 48 MB