Nm-Aic-64, Contact Closure Networkconfiguration Examples; Aic Ip Address Configuration Example - Cisco 2620 Configuration Manual

NM-AIC-64, Contact Closure NetworkConfiguration Examples

NM-AIC-64, Contact Closure NetworkConfiguration Examples
The following examples are documented below:
•
•
AIC CLI Configuration for Alarms, page A-22

AIC IP Address Configuration Example

The following example shows a Cisco 3600 router configured for AIC IP address:
version 12.2
no service single-slot-reload-enable
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 3600-top
!
logging rate-limit console 10 except errors
!
memory-size iomem 15
ip subnet-zero
!
!
no ip finger
no ip domain-lookup
ip host moe 172.31.10.2
ip host mickey 10.1.1.2
!
no ip dhcp-client network-discovery
frame-relay switching
x25 routing
!
!
call-history-mib max-size 50
!
interface Ethernet0/0
ip address 10.5.37.13 255.255.0.0
ip helper-address 223.255.254.254
no keepalive
half-duplex
!
interface Serial0/0
ip address 10.5.5.1 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
clockrate 500000
frame-relay class voice-vc
frame-relay traffic-shaping
frame-relay map ip 10.5.5.2 990 broadcast
frame-relay interface-dlci 990
frame-relay intf-type dce
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
A-16
AIC IP Address Configuration Example, page A-16
IP Route to the AIC Configuration Examples, page A-20
–
With an Unnumbered IP Address, page A-20
–
Without an Unnumbered IP Address, page A-21
Appendix A Configuration Examples
OL-1957-04