Wall-Mounting The Router - Cisco 1603R User Manual

Wall-Mounting the Router

Wall-Mounting the Router
Cisco 1600 series routers can be wall-mounted by using two number-six, 3/4-inch screws
(not included) and the molded mounting brackets on the bottom of the router (see
Figure 3-7).
Caution
(1/8 inch by 5/16 inch) to secure the screws. If the screws are not properly
anchored in wallboard or drywall, the strain of the network cable connections
could pull the router from the wall.
Figure 3-7
Mounting
bracket
Bottom
of router
Follow these steps to mount the router on a wall or other vertical surface, as shown in
Figure 3-8:
Step 1
3-10 Cisco 1600 Series Router Hardware Installation Guide
If you install the screws in drywall, use hollow wall-anchors
Wall-Mount Brackets (Bottom of Router)
7.5" (19.05 cm)
Install the two screws 7.5 inches (19.05 centimeters) apart on a wall or other flat
surface.
Front panel of router
Mounting
bracket