Optional Installations; Installing A Wan Interface Card - Cisco 1603R User Manual

Optional Installations

This chapter describes some procedures that you might not need for your router:
•
Installing the WAN Interface Card in the Router
•
Installing a Flash PC Card
•
Connecting an ISDN Telephone to the Cisco 1604
•
Wall-Mounting the Router

Installing a WAN Interface Card

Cisco 1600 series routers can support an additional WAN port on a one-port WAN interface
card that is installed in the router. This chapter describes the supported WAN interface cards
and describes the general procedure for installing any WAN interface card in any
Cisco 1600 series router.
For information about installing and connecting a specific card, refer to the Cisco WAN
Interface Cards Hardware Installation Guide that came with the card.
This procedure describes how to install a WAN interface card in a Cisco 1600 series router.
This example use an ISDN BRI U card and a Cisco 1601 router. The same procedure is
used to install any of the Cisco 1600-compatible cards in any Cisco 1600 series router.
C H A P T E R 3
Optional Installations 3-1