Connecting the Console Port
Connecting the Cisco 1605 to the WAN
The procedure for connecting the Cisco 1605 to the WAN depends on the type of WAN
interface card that is installed in the router. For instructions for the card that you are using,
refer to the Cisco WAN Interface Cards Hardware Installation Guide that came with your
WAN interface card.
Connecting the Console Port
The cable and adapters required for this connection are included with the router. Follow
these steps to connect the router to a terminal or PC:
Step 1
Step 2
Note
must provide the correct adapter for that port.
2-16
Cisco 1600 Series Router Hardware Installation Guide
Connect the light-blue console cable to the light-blue CONSOLE port on the
router (Figure 2-10).
Use the correct adapter to connect the other end of the cable to your terminal or
PC.
If your terminal or PC has a console port that does not fit one of the adapters, you