Cisco 1603R User Manual page 68

ISDN BRI Provisioning by Switch Type
Table B-2
Switch Type
5ESS Custom BRI
5ESS National ISDN
(NI-1) BRI
DMS-100 BRI
B-4 Cisco 1600 Series Router Hardware Installation Guide
ISDN Provisioning by Switch Type (Continued)
Provisioning
For voice and data
(Use these values only if you have an ISDN telephone connected.)
Two B channels for voice or data.
Multipoint.
Terminal type = D.
Two directory numbers assigned by service provider.
Two service profile identifiers (SPIDs) required, assigned by service
provider.
MTERM = 2.
Number of call appearances = 1.
Display = No.
Ringing/idle call appearances = idle.
Autohold= no.
Onetouch = no.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
Terminal type = A.
Two B channels for voice and data.
Two directory numbers assigned by service provider.
Two SPIDs required; assigned by service provider.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
Two B channels for voice and data.
Two directory numbers assigned by service provider.
Two SPIDs required; assigned by service provider.
Functional signaling.
Dynamic terminal endpoint identifier (TEI) assignment.
Maximum number of keys = 64.
Release key = no, or key number = no.
Ringing indicator = no.
EKTS = no.
PVC = 2.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.