Cisco 1603R User Manual page 47

Step 2
Figure 3-8 Mounting the Router on a Wall
Front panel of router
Mounting brackets
Hang the router on the screws by the mounting brackets so that the following
conditions are met:
•
The front panel LEDs face upward and are easily visible. You will use these
LEDs to verify that the router is operating properly. Mounting the router in
this position also reduces strain on the network cable connections.
•
The desktop power supply does not hang from its cable. If the power supply
is not supported, it will disconnect from its cable.
Wall-mount
screw
7 . 5
" (
1 9
. 0 5
c m
)
Wall
Wall-Mounting the Router
Wall-mount
screw
Optional Installations 3-11