D-Link SECURICAM Network DCS-2100G User Manual page 72

DCS-2100G User's Manual
For detailed information about each setting, please refer to Configuration > Advanced
> Mail & FTP in the section titled "Using the DCS-2100G With an Internet Browser"
(page 50). Click the apply button when finished.
Next, click the Applications button under the Tools tab to set the application settings
for the DCS-2100G.
In this window, follow the steps below to set the application settings for snapshots to be
recorded to an FTP site:
1 Select the weekdays you would like to record and enter the "Snapshots begin"
time and "Snapshots end" time for the weekly schedule, or select "All the time
except for the above schedule" if you want to enable full time snapshot recording.
2 Check "Event operation."
3 Set the delay "before detecting next event" to avoid continuous false alarms
following the original event.
4 Set the delay to "take snapshots after event" to capture the direction of the moving
object.
D-Link Systems, Inc.
Record Snapshots to your FTP Server with Motion Detection
X X X
X
X
Back Door
X
72