Table of Contents
Advertisement
DCS-2100G User's Manual
Installation Wizard
After you have successfully completed the hardware installation of the
DCS-2100G Internet Camera, it is necessary to install software to configure and operate
the camera. The first step is to install the Installation Wizard from the CD. Installation
Wizard will allow you to configure the Internet Camera to your network.
After the Installation Wizard software program is completed, you will have an operating
and controllable Internet Camera. From your Internet Explorer Web browser you will be
able to access the video and sound from the Internet camera. The camera has a built-in
Web server. This Web server will allow the camera to access the Internet without being
attached to a computer and permits users to view the video and audio remotely.
However, it is necessary to install the IP surveillance software from the enclosed CD
to create a truly powerful monitoring and surveillance system. The following section will
detail the installation of the Installation Wizard and the IP surveillance software.
Installing the Installation Wizard program
Inser t the CD that is included with the DCS-2100G Internet Camera. The
DCS-2100G installation menu will start up automatically from the CD. If the CD does
not start up automatically (this function may be disabled in the Windows operating
system), simply access the CD from Windows and click on the autorun.exe program to
access the installation menu shown below:
Click Install Software.
D-Link Systems, Inc.
Installation Wizard
12
Advertisement
Table of Contents
