D-Link SECURICAM Network DCS-2100G User Manual page 18

DCS-2100G User's Manual
The Installation Wizard will now show a MAC address for the DCS-2100G and an IP
address. This IP address may not be correct at this step in the installation until you see
"Yes" under the assigned column. The camera is now automatically configured with an
IP address consistent to the device it is connected to.
Select the MAC address. Click on the Link to Selected Devices button.
For more information regarding the functions of this screen, see the following section
titled "Installation Wizard Screen."
D-Link Systems, Inc.
Installation Wizard
18