Table of Contents
Advertisement
DCS-2100G User's Manual
Improve audio
quality in low
bandwidth
environment:
Wireless Mode:
Channel:
TX Rate:
Preamble:
Data Encryption:
D-Link Systems, Inc.
In a low bandwidth network environment you can check this
option to improve audio quality by sacrificing some real-time
synchronization.
Mute:
Click to disable the microphone on the camera.
SSID:
(Service Set Identifier) is a name that identifies a wireless
network. Access Points and wireless clients attempting to
connect to a specific WLAN (Wireless Local Area Network)
must use the same SSID. The default setting is default.
Click on the pull-down menu; select from the following options:
Infrastructure - connecting the WLAN using an Access Point
such as the DWL-2100AP or a DI-624 wireless router. (The
default setting.)
Ad-Hoc – wireless mode used when connecting directly to a
computer equipped with a wireless adapter in a peer-to-peer
environment.
The default wireless channel setting is channel 6. Select the
channel that is the same as the other wireless devices on your
network.
Select
22Mbps is the default setting.
Select Long or Short Preamble. The Preamble defines the
length of the CRC block (Cyclic Redundancy Check is a
common technique for detecting data transmission errors) for
communication between the Access Point and the roaming
wireless Network adapters. Long Preamble is the default
setting . Note: High network traffic areas should use the shorter
preamble type.
Enable Encryption by clicking on the box. The DCS-2100G has
Encryption disabled as the default setting.
Using the DCS-2100G with an Internet Browser
the
transmission
rate
on
the
network.
48
Advertisement
Table of Contents
