D-Link SECURICAM Network DCS-2100G User Manual page 52

DCS-2100G User's Manual
2nd FTP server:
2nd FTP user
password:
2nd FTP remote
Secondary FTP
passive mode:
Invalid settings may cause the DCS-2100G to not respond. Change the configuration
settings only if necessary. Consult with your network administrator or your Internet Service
Provider (ISP) if you do not have the necessary information. If you cannot connect to
the camera, refer to page 129 for camera reset and restore factory settings procedures.
D-Link Systems, Inc.
The domain name or IP address of the external FTP server.
Note that the 2nd FTP server will only be used if the 1st FTP
server is unavailable. If the image upload to the 1st FTP server
is successful, no attempts will be made to connect to the 2nd
FTP server.
name:
Granted user name on the backup FTP server.
2nd FTP
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
folder:
Passive mode setting for the backup FTP server.
Using the DCS-2100G with an Internet Browser
52