Network Settings - D-Link SECURICAM Network DCS-2100G User Manual

DCS-2100G User's Manual

Network Settings

Here users can configure the Network Settings for the camera. Enter the IP address,
Subnet mask, Default router IP, Primary DNS, and Secondary DNS. Automatically, the
option to reset IP address at boot selected. If you would like to save your IP address
settings, make sure to uncheck this box. These settings can also be configured on the
Advanced > Network screen (page 47) when configuring the camera via a Web
Browser.
Click Next and then Apply to save the configured settings. Users can click Previous to
modify changes or mistakes.
D-Link Systems, Inc.
Installation Wizard Screen
23