Resetting The Airstation Settings To The Factory Settings - Buffalo AirStation WLAR-L11-L Reference Manual

7
AirStation's IP address will be displayed in the "IP Address" field.
Resetting the AirStation Setting to the Factory Settings
1
Connect the power supply to the AirStation.
2
Press and hold the factory setting switch on the back of the AirStation for 3 sec-
onds minimum. The DIAG lamp in the front (bottom) will flash. When the DIAG
lamp stops flashing, the AirStation is reset to the factory setting.
ture and Functions" section in the separate Install manual.
18 WLAR-L11-L Reference Manual
For the factory setting switch, refer to the "Package Details and Parts Nomencla-
AirStation's IP address will be displayed.