The AirStation 54Mbps Bridge Base Station , WLA-G54, is a wireless network access point that can be added to an existing network (LAN) to create a wireless network or added to an existing WLAN to extend the range of the WLAN. The WLA-G54 complies with the IEEE 802.11g wireless standard and is interoperable with the IEEE 802.11b wireless standard.
Software License Agreement, do not download, copy or install the AirStation software. It is the policy of Buffalo Technology to improve products as new technology, components, software and fi rmware become available. Before you proceed with the installation of this product, please consult the Buffalo website (http://www.buffalotech.com) to download and install the latest software for your product.
Page 4
• Leave the Password box blank (do not enter anything into the Password box) and click OK. If the following screen is shown, con nec tion to the WLA-G54 is complete. If the following screen is shown, con nec tion to the WLA-G54 is complete.
3.2 Setup Overview The WLA-G54 is confi gured to function right out of the box. Simple settings for security and MAC Address registration are offered in this section- Specialized setups for security, fi ltering and other features will be explained in later sections by clicking the Advanced Button.
USING AIRSTATION FOR ADVANCED CONFIGURATIONS Although your AirStation will function fine using only the settings from Section 3, you may wish to explore more advanced op- tions. This chapter explains each parameter in the Advanced button. Click the Top tab and click the Advanced button. 4.
Page 7
ANY connections are allowed. If Deny is selected under the the “ANY Connection,” SSID of the AirStation will not be broadcast and users will not be able to connect to the WLA-G54 unless the specifi c ESS-ID is entered in the client PC.
4. 1 .4 Wireless LAN Computer Lim i ta tion This option limits the PCs allowed a wireless connection to the AirStation. It is used to control the wireless connections to the AirStation. Wireless PC’s Connection - Select Limit to restrict the connection and Do not Limit for open access. Register your client PC’s MAC address before selecting Set.
• Metric - Number of bridges (1-15) to be passed before the packet reaches its destination. Once settings have been added to the WDS confi guration screen, the MAC Address of associated Access Point(s) will be displayed. Click Apply to confi rm settings.
4.2.2 Packet Filter - This feature does not function on the AirStation Bridge Base Station Log Output - Activates the packet fi lter log. Filter setting - Choose type from pull-down menu. For Manual setting: • Operation - Packets from LAN, select ignored, rejected, or accepted. NOTE: This feature does not function on the AirStation Bridge Base Station 4.3 Management (Network Diagnosis Settings)
Enter new password. Enter up to eight alpha- numeric characters (case sensitive) and confi rm password If password is forgotten or misplaced, The WLA-G54 can be returned to all the factory default settings by holding down the INIT button on the back of the unit for three seconds.
4.3.5 PING Test Destination - Enter IP address for test and click OK 4.3.6 Log Information Display log info level - Select Error and/or Notify to specify the types of reports to be logged by the AirStation. Display log info - Select the specifi c reports to be logged. Log information - Displays recorded logs.
ADDITIONAL INFORMATION Please check the Buffalo Web site for the latest information and any corrections done for this manual. For more information, please consult one of the following: • The on-line help system of your AirStation wireless system - for in for ma tion about software and driver func tion al ity.
Page 14
NOTE: The range values listed in Table “Radio Characteristics” are typical distances as measured at Buffalo Technology AirStation laborato- ries. These values are provided for your guidance but may vary according to the actual radio conditions at the location where the AirStation product is installed.
LAN Administrator. Make changes if neces- sary, and click OK. 5. When prompted, restart your computer. B. 1.3 Other Problems Please refer to www.buffalotech.com for further reference ma- terials or call Buffalo’s Toll-Free Tech Support 24 hours a day, 7 days a week at 866-752-6210.
Page 16
Glossary 10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling.
RJ-45 connector: An 8-pin connector used between a twisted pair cable and a data transmission device. Bridge: Device that can connect individual LANs and remote sites to a server. Roaming: The ability to use a wireless device while moving from one to another without losing the connection.
Page 18
® 4030 W. Braker Ln. Suite 120 Austin, Texas 78759 Tel: 800-456-9799 Fax: 512-794-8606 Technical Support is available 24 hours a day, 7 days a week, Toll-Free: 866-752-6210 email: info@buffalotech.com...