Chapter 3 Configuration
Setting the AirStation IP Address (Windows)
The Ethernet Converter Manager can be used to change the IP address of the AirStation. If using a
Windows computer, follow the procedure below to set the AirStation's IP address.
1
Click [Start] > [All programs] > [BUFFALO] > [AirStation Utility] > [Ethernet Converter
Manager].
2
3
When this screen appears, enter the
password, then click [OK].
Notes: · By default, the password is "password".
· If you forget your password, hold down
the reset button (page 8) to initialize all
settings. The password will then revert to
"password". Note that all other settings
will also revert to their default values.
Click [Options] > [Modify IP Address...].
- 15 -