Limiting Connections From Wireless Lan Pc - Buffalo AirStation WLAR-L11-L Reference Manual

Limiting Connections from Wireless LAN PC

To limit connections to the AirStation from wireless LAN PCs, use the following procedure. After setting,
only registered wireless LAN PCs can communicate with Ethernet LAN PCs.
Setting Procedure
1
Refer to the "Displaying AirStation Setting Screen" section (page 6) in Chapter
1, What is Next? and display the AirStation setting screen.
2
3
4
If the wireless LAN card of your choice on the network is displayed in the Table of
Wireless LAN PCs for which Connection Is Disabled, select the Enable Connection
check box for the relevant MAC address and click the Change button.
5
"Add MAC Address" will be displayed. Click the Return button.
Click the Custom Setup button.
Click the Wireless LAN Computer Limita-
tion Setup hyperlink.
Enter the MAC address of the wireless LAN
PCs that can connect to the network. Then
click the Add button.
• Refer to the manual enclosed with the
wireless LAN PC for the MAC address.
• When entering the MAC address, sepa-
rate each two-digit group by entering a
colon (:) between them.
WLAR-L11-L Reference Manual 9