Honeywell HW-AV-LTE-M Installation And Operation Manual
Clss pathway
Hide thumbs
Also See for HW-AV-LTE-M:
- Quick start manual (2 pages) ,
- Product installation document (9 pages)
Related Manuals for Honeywell HW-AV-LTE-M
Summary of Contents for Honeywell HW-AV-LTE-M
- Page 1 Honeywell Connected Life Safety Services CLSS Pathway Cellular and IP Communicator HW-AV-LTE-M Installation and Operation Manual P/N:LS10340-000HW-E ECN: 00004957 REV. B | February 2024...
-
Page 2: Fire Alarm & Emergency Communication System Limitations
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services FIRE ALARM & EMERGENCY COMMUNICATION SYSTEM LIMITATIONS connection of alarm transmission wiring, communications, WHILE A LIFE SAFETY SYSTEM MAY LOWER signaling, and/or power. If detectors are not so located, a... -
Page 3: Installation Precautions
Communications du Canada ©2024 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. Installation and Operation Manual | REV. B... -
Page 4: Software Downloads
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services SOFTWARE DOWNLOADS In order to supply the latest features and functionality in fire alarm and life safety technology to our customers, we make frequent upgrades to the embedded software in our products. To ensure that you are installing and programming the latest features, we strongly recommend that you download the most current version of software for each product prior to commissioning any system. -
Page 5: Table Of Contents
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services TABLE OF CONTENTS Fire Alarm & Emergency Communication System Limitations While a life safety system may lower insurance rates, it is not a substitute for life and property insurance! - Page 6 Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services 4.4.2 Assign a Central Station Account to the Device Section 5: Mounting and Wiring 5.1 Prerequisites 5.2 Programming the Connected Panel 5.3 Before Mounting 5.4 Important Considerations 5.5 Mounting Procedure 5.6 Installing the Antenna...
-
Page 7: Documentation Feedback
Using This Manual This manual is written with the understanding that the user is trained in the operations and services required for this product. Honeywell reserves the right to modify and revise this manual without notice. Usage of Terms In this manual, terms used for this product name are as follows: The CLSS Pathway may also be referred as the communicator. - Page 8 Your suggestion for how to correct/improve documentation Send email messages to: FireSystem.TechPubs@Honeywell.com Please note this email address is for documentation feedback only. If you have any technical issues, please contact Honeywell Technical Services. Installation and Operation Manual | REV. B...
-
Page 9: Agency Listings And Approvals
Honeywell will not be liable in any event of incidental, special or consequential damages (including loss of profits), and the Client shall have no claim against Honeywell for termination of contracts, indemnification, compensation for loss of customers, loss of profits, prospective profits, distribution rights, market share, goodwill, investments made or any similar losses that may result from any faults in the operation of the Device and the services provided by Honeywell. -
Page 10: Technical Support
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services The Device is mounted in limited access areas. Any system repairs must be done only by qualified, safety aware personnel. Do not disassemble or refit the Device. Do not attempt to personally repair it. -
Page 11: Section 2: Overview
Verizon network availability and return to its primary carrier. Note : If Verizon have poor network in the location where pathway is getting installed, contact Honeywell Tech Support to switch AT&T as primary and Verizon as secondary . - Page 12 Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services The CLSS Site Manager Web-based application for device configurations, administration, and test and inspect compliance reports. The Connected Life Safety Services App Supports alarm, events, and email notifications Can use sole path (Cellular only) or dual path (Cellular and IP)
-
Page 13: Specifications
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services 2.4 SPECIFICATIONS Table 2.1 CLSS Pathway Specifications Operational Requirements Supply Voltage +12VDC to +29V DC Current Standby: 60mA Peak: 200mA Frequency LTE CAT-M1 700/850/1700/1900/2100 MHz GSM Providers AT&T, Verizon, or other networks available in the... -
Page 14: Clss Pathway Parts
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services 2.5 CLSS PATHWAY PARTS Table 2.2 CLSS Pathway Parts Part Number Part Name Photo HW-AV-LTE- CLSS Pathway Module HW-AV-ENC Enclosure with Mounting Plate Installation and Operation Manual | REV. B... -
Page 15: Section 3: Security Recommendations
Incorrect operation, spurious alarms, or both Theft or damage to the contents of the system Capture and modification or deletion of data causing possible liability to the installation Site and Honeywell 3.2.2 USER ACCESS AND PASSWORDS Observe the following good practices: Ensure physical security of passwords. -
Page 16: Memory Media
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services 3.3 MEMORY MEDIA Use only authorized removable media. Use an up-to-date anti-virus software to scan the removable media and check for viruses and malware. Ensure that the memory media is not used for other purposes to avoid risk of infection. -
Page 17: Section 4: Central Station Communications
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services SECTION 4: CENTRAL STATION COMMUNICATIONS The CLSS Pathway sends events from a panel to a specified Central Monitoring Station according to the settings in the CLSS Site Manager and CLSS App. -
Page 18: Assign A Central Station Account To The Device
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Log onto CLSS Site Manager: fire.honeywell.com Click your profile icon at the top-right corner and select External Accounts. Click ADD NEW at the Central Stations section in the External Accounts page. -
Page 19: Section 5: Mounting And Wiring
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services SECTION 5: MOUNTING AND WIRING CAUTION: REQUIRED ENCLOSURE THE COMMUNICATOR SHOULD ONLY BE MOUNTED WITHIN THE HW-AV-ENC ENCLOSURE. 5.1 PREREQUISITES The following are required: Know whether to install CLSS Pathway for dialer capture or for panel relay monitoring. - Page 20 Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Install the communicator only at a dry indoor location. The location and wiring methods must be in accordance with ANSI/NFPA 70, National Electrical code. Install in accordance with the NFPA 72, National Fire Alarm and Signaling Code.
-
Page 21: Mounting Procedure
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services 5.5 MOUNTING PROCEDURE In the Quick Start Guide, locate the installation sticker at the bottom right of the last page. Check that the sticker has the serial number and the configuration key to program the communicator. -
Page 22: Connecting The Antenna
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services The antenna should be positioned perpendicularly to the ground, either right side up or upside down. Keep the antenna away from any sources interfering with or blocking the RF signal. For example, a metal object may shield the cellular radio RF signal. -
Page 23: Wiring For Dry Contact Relay Outputs
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Connect the panel to the communicator as specified in Wiring for Dialer Capture. Power up the system as specified in Powering On. Figure 5-1: Wiring for Dialer Capture... -
Page 24: Powering On
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Install a 10K resistor between the communicator ground and its each input. Connect the panel relay terminals and the communicator as specified in Wiring for Dry Contact Relay Monitoring. -
Page 25: Activating Central Station Communication
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Ensure that the Green LED on the communicator is continuously ON indicating successful connections. NOTE: Refer to Troubleshooting if there is an issue to resolve. ACTIVATING CENTRAL STATION COMMUNICATION CAUTION: VERIFY ALL CONNECTIONS BEFORE ACTIVATING THE CENTRAL STATION COMMUNICATION, CHECK ALL CONNECTIONS. -
Page 26: Improving The Signal Quality
5.11.1 IMPROVING THE SIGNAL QUALITY Honeywell recommends that the signal strength rating should be 5 or above for a consistent good connection. If the signal rating is lower than 5, reposition the antenna, and monitor the signal strength bars in the CLSS App. -
Page 27: Section 6: Troubleshooting
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services SECTION 6: TROUBLESHOOTING The CLSS Pathway sends events from a panel to a specified Central Monitoring Station per the settings in CLSS Site Manager and CLSS App. 6.1 CONNECTION TROUBLES Resolved Status Indication: The Communicator LED starts flashing. - Page 28 Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services Trouble Corrective Actions No Events Are Verify the RING and TIP connections. Received Ensure that the RING and TIP terminals are connected to a TELCO ring and tip, and not to the R-1/T-1 terminals.
-
Page 29: Manufacturer Warranties And Limitation Of Liability
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services MANUFACTURER WARRANTIES AND LIMITATION OF LIABILITY Manufacturer Warranties. Subject to the limitations set forth herein, Manufacturer warrants that the Products manufactured by it in its Northford, Connecticut facility and sold by it to its authorized Distributors shall be free, under normal use and service, from defects in material and workmanship for a period of thirty six months (36) months from the date of manufacture (effective Jan. - Page 30 12 Clintonville Rd 140 Waterside Rd Northford, CT 06472 Leicester LE5 1TN, UK (203) 484-7161 +44 (0) 203 4091779...