Husqvarna 701 Enduro 2017 Repair Manual page 244

22 LUBRICATION SYSTEM
242
Mount and tighten screw plug
©
with the O-ring.
Guideline
1
Plug, oil screen
M20x1.5
15 Nm (11.1 Ibf ft)
m
—®
F00587-10
Position oil screen © with the O-rings.
Mount and tighten screw plug
©
with the O-ring.
Guideline
MB
Plug, oil screen
M20x1.5
15 Nm (11.1 Ibf ft)
\
L
1 j
0
F00584-10
Insert new oil filter
©
Lubricate the O-ring of the oil filter cover. Position oil filter cover ©.
Mount and tighten screws
©
Guideline
w
©
m
Qfl ■
Screw, oil filter cover M5 6 Nm (4.4 Ibf ft)
^7
>©
F00585-10
Insert new oil filter ©.
Lubricate the O-ring of the oil filter cover. Position oil filter cover O-
Mount and tighten screws
©
Guideline
la
i
Screw, oil filter cover M5 6 Nm (4.4 Ibf ft)
tM
7
Fill up with engine oil at the clutch cover.
© ©
Engine oil (SAE 10W/50) (m p. 316) 1.70 I (1.8 qt.) Engine oil
WH F00589-10
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
I
Mount and tighten oil filler plug O with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
- Always make sure there is sufficient ventilation when running the
engine.
- Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
A
o
H01066-10
- Start the engine and check that it is oil-tight.
Finishing work
- Install the engine guard, (i! p. 43)
- Check the engine oil level. p. 238)