Husqvarna P 524XR EFI Operator's Manual page 59

To replace the belt on the cutting deck
(R137, R137X)
WARNING:
protective gloves.
Note:
The cutting decks can look different between
different models.
1. Remove the cutting deck. Refer to
cutting deck on page 27 .
2. Remove the front cover.
3. Pull the spring handle to the left out from the spring
holder to loosen the tension on the tension wheel for
the drive belt.
1929 - 003 - 05.12.2023
Risk of crush injury. Use
To remove the
4. Remove the belt from the pulley on the tool frame.
5. Remove the cutting deck covers. Refer to
the cutting deck covers (R137, 137X) on page 47 .
6. Disconnect the tension spring for the belt and
remove the belt.
7. Attach a new belt in the opposite sequence.
Belt overview - R137, R137X
To remove and install the mulch plug
(C112, C112X, C122, C122X)
1. Put the cutting deck in servicing position.
To remove
59