Table of Contents
Advertisement
Available languages
Available languages
English
English
• Do not expose the charger to water.
• Do not open the charger.
• Do not probe the charger.
• The appliance/tool/battery must be placed in a well ventilated
area when charging.
Electrical safety
Your charger has been designed for a specific voltage. Always
check that the mains voltage corresponds to the voltage on the
rating plate. Never attempt to replace the charger unit with a
regular mains plug.
symbols on the charger
Read all of this manual carefully before using
#
the appliance.
This tool is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on
the rating plate.
The charging base is intended for indoor use
only.
labels on appliance
The following symbols appear on this appliance along with the
date code:
NVC115JL/NVC115W/NVC115WA/
WDC115WA Only use with charger
S003AQ 15
SSC-040015EU/
SSC-040015EU/ S003BDV0500015
S003DV0500015
NVC215W/NVC215WA/NVC220WC/
WDC215WA Only use with charger
S003AQ 15
SSC-080015EU/
S003BEV0800015
SSC-080015EU/ S003BEV0800015
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Dust bowl
4. Charger base (NVC115W, NVC115WA, NVC215W, NVC215WA,
NVC220WC, WDC115WA, WDC215WA units only)
5. Charger jack plug (NVC115JL unit only)
6. Retractable crevice tool (NVC215W, NVC215WA and
NVC220WC only)
7. Brush tool (NVC115WA, NVC215WA, NVC220WC,
WDC115WA and WDC215WA only)
8. Crevice tool (NVC115WA only)
9. Squeegee (WDC115WA and WDC215WA units only)
10. Pet Brush
11. Dry pick up cloth filter (NVC units only)
12. Pre-filter (NVC units only)
13. Wet/Dry foam insert (WDC units only)
14. Wet/Dry deflector (WDC units only)
Installation
Wall Mounting (NVC115W, NVC115WA,
NVC215W, NVC215WA, NVC220WC, WDC115WA,
WDC215WA units only) (Fig. A, C)
The product can be attached to a wall to provide a convenient
storage and charging point for the appliance.
6
6
When fixing to a wall, make sure that the fixing method is
suitable for the wall type and is appropriate to the weight of
the appliance.
• Mark the location of the screw holes (within reach of
an electrical outlet for charging the vac while it is on the
wall bracket).
• Fix the mounting bracket to the wall using appropriate screws
and plugs for the type of wall and weight of the appliance.
• Hang the appliance on the wall by placing the opening
on the base of the vac over the hook in the wall mount
charging bracket.
Assembly
Accessories (Fig. A, E)
These models may be supplied with some of the
following accessories:
• A squeegee tool
9
for wet use on hard surfaces.
• A brush tool
for furniture and stairs.
7
• A crevice tool
8
for confined spaces.
• A pet brush tool
10
for pet hair removal.
NOTE: Never use the pet brush tool directly on a pet.
Fitting (Fig. A, E)
• Insert the appropriate accessory into the front of the
appliance. Make sure that the accessory is pushed fully in.
Retractable crevice tool (nVC215W, nVC215WA and
nVC220WC units only) (Fig. A, F)
• Extend the crevice tool
6
in place.
• To retract the crevice tool, push down on the button and slide
back into the dust bowl
3
Use
• Before first use, the battery must be charged for at least
24 hours.
WARNING! Before charging, be sure to empty all liquid
contents and dry thoroughly, to avoid damage to your appliance.
Charging the battery via charger base (nVC115W,
nVC115WA, nVC215W, nVC215WA, nVC220WC,
WDC115WA, WDC215WA units only) (Fig. A, C)
• Make sure that the appliance is switched off. The battery will
not be charged with the on/off switch
• Place the appliance on the charging bracket
• Plug in the charger. Switch on at the mains.
• Leave the appliance to charge for at least 21 hours.
While charging, the charger may become warm. This is normal
and does not indicate a problem. The appliance can be left
connected to the charger indefinitely.
WARNING! Do not charge the battery at ambient
temperatures below 10 °C or above 40 °C.
Charging the battery via charger jack plug (nVC115Jl
unit only) (Fig. A, D)
• Make sure that the appliance is switched off. The battery will
not be charged with the on/off switch
• Insert the charger jack plug
charger base
.
4
• Plug in the charger. Switch on at the mains.
• The LED indicator will light up.
• Leave the appliance to charge for at least 21 hours.
as shown in Figure F, until it clicks
as shown in Figure F.
pressed.
1
4
.
1
pressed.
into the charging port on the
5
Advertisement
Table of Contents
